Surgical masks are always sold in bags or boxes, but do you know how to pack surgical mask? Due to the particularity of masks, there are also special requirements for packaging, the most important of which is cleanliness. This has prompted many mask manufacturers to use mask packing machine instead of manual packaging. So how to pack surgical mask?
Install the packaging film roll on the shaft roller, the surgical mask is placed in the feeder, the conveyor belt automatically transports the mask to the packaging position, wrapped in a film, then heated and pressed into a shape, then sent to the horizontal sealing and cutting knife for heat sealing and horizontal sealing, cutting, then the packed mask is output by the conveyor belt.
Features:
1. Made of stainless steel, meeting the packaging requirements of surgical masks.
2. Fully automatic, avoid contact between people and masks, prevent pollution.
3. Adopt single servo or double servo motor control.
4. Intelligent, higher packaging accuracy, wide adjustable range, simple control, low rejection rate, and good stability.
5. Adopting a fully open box structure, the transmission structure is clear at a glance, and the maintenance is more convenient.
In order to ensure the sanitation of the packaging environment and the service period of the machine, regular maintenance is very necessary:
1. Before cleaning and wiping the machine, the power must be turned off to ensure the safety of man and machine.
2. Wipe the work surface and outer surface of the machine with a clean damp cloth.
3. Use compressed air to remove product debris from the feeding mechanism, the middle seal and the end seal.
4. Use a steel wire brush coated with lubricating oil to remove the film fragments adhering to the end seal knife.
In order to ask you to better understand the packaging process of surgical masks, here is a test video: