Mask Packing Machine Working Principle

Mask packing machine is a very important tool for mask packing, but do you know the working principle of mask packing machine?
 
Mask packing machine working principle is very simple, first install the packaging film on the packaging machine, and then turn on. The packaging film is pulled down by the bag-pulling motor, and then the film supply part supplies the film according to the signal of the sensor, and the packaging film is formed by the forming part. Then, the bottom of the packaging bag is sealed by the heat sealing part, and transferred to the heat sealing knife holder, then the heat sealing is cut off at the same time, and a packaging process is completed.
 
And you can choose a single package, multiple packages. You can pack disposable masks, medical masks, kn95, n95, etc.
 
Precautions for use:
1. Before starting the machine each time, check the workbench, conveyor belt, horizontal sealing knife holder, there must be no tools or any debris, observe whether there are abnormalities around the machine; the protective device should be in the correct position.
2. During the operation of the machine, it is strictly forbidden for any part of the body to be close to or contact with the moving parts, and it is strictly forbidden to extend hands and tools into the horizontal sealing knife seat.
3. When the machine is working normally, it is strictly forbidden to switch the operation buttons frequently, it is strictly forbidden to change the parameter settings at random, and it is strictly forbidden to run at super high speed for a long time.
4. When checking and repairing the electrical control circuit, the power supply must be cut off and must be done by professional electrical personnel.
 
The above is the main working principle of the mask packing machine, if you want to know more details, please contact us：
Email: sherry@machinehall.com
phone/whatsapp: +8615515573212