Cankey Packaging Machinery Total Solution Expert
  1. Your Location:
  2. Home>
  3. Blog>

What Is Bottle Filling Process?

  • Release Lime: Aug 19 2019
  • Source: Sherry
What is the bottle filling process? There are three main process: bottle washing, bottle filling and bottle capping.
1. Bottle Washing
After the bottle enters the bottle filling machine main part, it enters the bottle washing machine through the transmission star wheel. The bottle holder clamps the bottle mouth and flips up 180° along the washing bottle guide rail to make the bottle mouth downward. In the specific area of the bottle washer, the bottle holder nozzle sprays sterile water and rinses the inner wall of the bottle. After the bottle is rinsed and drained, it is turned down by 180° along the guide rail under the bottle clamp to make the bottle mouth upward. The washed bottle is passed through a stainless steel dial and exported from the bottle washer to the filling position.
 Bottle Filling Process

2. Bottle Filling
The cleaned bottle is exported from the bottle washing section to the filling section by dialing the star wheel. The bottle entering the filling part is clamped by the bottle neck fork, and is raised, held and lowered by the lifting mechanism under the action of the cylinder. During the operation, the bottle tops the filling valve and is filled by closed filling. The adjustment of the output is controlled by the inverter. The high-speed filling valve is used, the liquid level is controlled, and the error is small.

3. Bottle Capping
After the filling is completed, the bottle enters the capping machine through the transmission star wheel, and the anti-rotation knife on the capping machine catches the bottle neck portion, and keeps the bottle upright and prevents rotation together with the bottle neck guard plate outside the capping machine. The capping head revolves and rotates under the driving of the capping machine main shaft, and realizes the capping, the capping, the capping and the capping action under the action of the cam, and completes the entire capping process. The capping head adopts a magnetic constant torque device. When the capping cap is taken out by the capping disc, the cap is placed against the lid, and the lid is rightened to ensure the position of the cap in the capping mold is correct, and the capping quality is ensured. When the cap is completed, the capping head overcomes the magnetic slip and does not damage the cap, and the cap bar ejects the cap from the capping die as the capping head rises.
This completes the whole bottle filling process.

Share This:

Send Inquiry

Your contact information will not be published. Required fields are marked*