Cankey Packaging Machinery Total Solution Expert
  1. Your Location:
  2. Home>
  3. Blog>

How Do You Fill and Seal A Stand Up Pouch?

  • Release Lime: Sep 27 2021
  • Source: Sherry
How do you fill and seal a stand up pouch? We always use the pouch filling machine, which can complete fill and seal automatically.
How does the machine work?
There are mainly the following steps:
1. Feeding bag. Using the method of taking out the bag from the top and sending the bag from the bottom, the packaging bag is sent to the machine clip. and the machine automatically takes out the bag for packaging work. When there is no bag, the device will sound an alarm.
2. Imprint. After the ribbon is tested, the packaging bag is subjected to the normal coding process. After the ribbon is used up, the equipment will emit a warning sound to remind.
3. Filling. Open the packaging bag and fill it with materials. The machine will first detect whether the packaging bag is opened. If the bag is not opened, it will not discharge.
4. Sealing. Seal the packaging bag filled with materials at a set temperature, the heat-sealed packaged products will be cooled immediately to ensure the aesthetics of the seal.
 how do you fill and seal a stand up pouch

Can it be used for the filling and sealing of different stand up pouches?
Yes. Such as zipper bags, spout bags, special-shaped bags, etc. The material can be paper-plastic composite, plastic-plastic composite, plastic-steel composite, PE composite and other packaging materials.
What should I pay attention to when filling and sealing?
The characteristics of the filling material. For example, is it sticky, corrosive, volatile, etc.
Sealing temperature setting. According to the material of the bag, the sealing temperature is different. Before starting the packaging formally, it is necessary to test the machine to adjust the appropriate temperature to prevent excessive shrinkage.
If you have other questions of stand up pouch fill and seal, contact us: 

Share This:

Send Inquiry

Your contact information will not be published. Required fields are marked*