Cankey Packaging Machinery Total Solution Expert
  1. Your Location:
  2. Home>
  3. Blog>

How Do You Fill A Liquid Spout Pouch?

  • Release Lime: Oct 06 2021
  • Source: Sherry
From food to cosmetics, from toiletries products to chemical products, more and more liquid products are fill in spout pouch. There are many ways to fill the spout pouch, but if something goes wrong, it may leak or break. So how do you fill a liquid spout pouch?
Liquid pouch filling machine is designed to complete the filling of spout pouches. The filling process is mainly as follows:
1. Take out the bag: The width of the pouch can be adjusted, the pouch is sent to the machine clip by the way of taking out from the top, feeding it from the bottom.
2. Print production date: Ribbon detection, shutdown alarm when the ribbon runs out, touch screen display, thermal printer.
3. Open the bag: Top open bag, open bag detection, open bag without material, no material blanking without opening bag.
4. Filling material: Detection, the material is not filled, heat-sealed and not sealed, if the material is too full, the sealing will not be smooth.
5. Sealing: Cold sealing and high temperature heat sealing.
6. Shaping output finished product: Reshape the seal to ensure the beauty of the seal.
According to the characteristics of different materials, the packaging process will be different.
Spout pouch filling machine
What should you pay attention to when filling spout pouch?
1. Set temperature: The sealing temperature of different packaging materials is different, and the appropriate temperature needs to be selected after debugging. The temperature is too low, the sealing is not tight, and it is easy to leak. If the temperature is too high, the seal will shrink too much, which will affect the aesthetics.
2. During the packaging process, the quality inspector should check the finished products at any time to see if the sealing is tight. If wrinkles or poor sealing are found, the equipment should be adjusted in time to avoid large quantities of unqualified products.
3. Clean up the oil stains and stains on the surface of the equipment after shutdown, and keep the indoor environment dry and free of corrosive gases. In particular, clean up the residual material on the heat seal to prevent the seal from being tightly sealed the next time it is used.
How to fill spout pouch of different sizes on one equipment?
This filling equipment is multi-functional and can be applied not only to different liquid materials, but also to different bag sizes. By adjusting the length and width of the storage part of the pouch, pouches of different sizes can be placed.
If you have other questions, feel free contact us: 

Share This:

Send Inquiry

Your contact information will not be published. Required fields are marked*