Cankey Packaging Machinery Total Solution Expert
  1. Your Location:
  2. Home>
  3. Blog>

What Is A Stick Pack Machine?

  • Release Lime: Oct 06 2022
  • Source: Sherry
What is a stick pack machine? The machine is usually a vertical fill seal packaging machine. Multiple stick packs are formed by cutting a roll of film, then the sticks are filled and sealed.
Stick packs packaging are commonly used in the food, pharmaceutical, nutraceutical and cosmetic industries. Such as coffee, spices, shampoo, medicine, etc.
 stick pack packaging
How does stick pack machine work?
1. Before starting, check whether the compressed air pressure meets the requirements, and check whether the main components are in good condition, such as the heating belt. At the same time, check if there are other people around the machine to ensure safety after startup.
2. Clean feed systems and gauges before production to ensure product hygiene.
3. Turn off the main power air switch, turn on the power, set and check the temperature of each thermostat.
4. First adjust the bag making, check the coding effect, and start the feeding system at the same time. When the material meets the requirements, start the bag-making mechanism bag, check the vacuum degree and heat-sealing quality of the vacuum box, that is, after the bag-making meets the requirements, start the material filling and production.
5. In the production process, check the quality of the product at any time, whether it is qualified or not, and adjust it in time if there is any problem.
6. If there is a problem with the equipment or the quality of the product is unqualified during the production process, it should be stopped immediately to deal with the problem. It is strictly forbidden to deal with problems during the operation of the machine to prevent safety accidents.
7. At the end of each shift, operators must cut off the bottom and clean the machine. During the cleaning process, it is forbidden to wash the equipment with a large amount of water or high pressure water, and pay attention to protect the electrical components. After cleaning, make sure there is no standing water on the machine and floor before leaving.
If you have other questions, you can contact us. (Email: )

Share This:

Send Inquiry

Your contact information will not be published. Required fields are marked*