0086-15515573212
info@cankeytech.com
Your Location:Powder Filling Machine Sold in USA
- Release Lime: May 19 2022
- Source: Sherry
The powder filling machine has a very wide range of uses, so it is loved by many customers. A customer from the US ordered a powder filling machine for their factory. They will use the machine to package the glucose powder they produce in 250g bottles. Then it needs to be sealed with aluminum foil and labelled.
This equipment is upgraded by our company according to the needs of market development and combined with practice. In line with the national GMP standard, the design is more reasonable, more concise and stronger.
Features:
1. Program modular design, PLC control system, man-machine interface, all parameters can be added to the program module, which is convenient for later use.
2. Use can or bottle packaging and configure automatic can feeding system, which can realize no bottle, no filling.
3. The filling precision is high, and the qualified rate is 99%.
How does the powder filling machine work?
The machine measures the weight of the material through the screw, and the number of turns determines the weight of the package. It is then filled into the bottle through the filling head. The bottle enters the aluminum foil sealing process through the conveyor belt, and finally the labeling machine automatically completes the labeling.
In order to make the machine can serve the USA customer for a long time, we give the following maintenance suggestions:
First, lubrication work. Equipment maintenance personnel should regularly lubricate the gear meshing parts of the machine, the oil filling hole of the bearing with a seat and each moving part for lubrication. The reducer is strictly prohibited from running without oil.
Second, in terms of maintenance, before using the machine, check the screws in all parts of the machine, and there must be no looseness, otherwise, it will affect the normal operation of the machine. For its electrical parts, attention should be paid to waterproof, moisture-proof and anti-corrosion to ensure that the inside of the electric control box and the terminals are clean and prevent electrical failures.
Third, cleaning work. Generally speaking, after the shutdown, the metering part should be cleaned in time. The scattered materials should be cleaned up in time, so as to better extend their service life. At the same time, the dust in the electric control box should be cleaned frequently to prevent electrical faults such as short circuit or poor contact.
If you also want to buy the machine in USA, contact us now. (Email: info@cankeytech.com )
This equipment is upgraded by our company according to the needs of market development and combined with practice. In line with the national GMP standard, the design is more reasonable, more concise and stronger.
Features:
1. Program modular design, PLC control system, man-machine interface, all parameters can be added to the program module, which is convenient for later use.
2. Use can or bottle packaging and configure automatic can feeding system, which can realize no bottle, no filling.
3. The filling precision is high, and the qualified rate is 99%.
How does the powder filling machine work?
The machine measures the weight of the material through the screw, and the number of turns determines the weight of the package. It is then filled into the bottle through the filling head. The bottle enters the aluminum foil sealing process through the conveyor belt, and finally the labeling machine automatically completes the labeling.
In order to make the machine can serve the USA customer for a long time, we give the following maintenance suggestions:
First, lubrication work. Equipment maintenance personnel should regularly lubricate the gear meshing parts of the machine, the oil filling hole of the bearing with a seat and each moving part for lubrication. The reducer is strictly prohibited from running without oil.
Second, in terms of maintenance, before using the machine, check the screws in all parts of the machine, and there must be no looseness, otherwise, it will affect the normal operation of the machine. For its electrical parts, attention should be paid to waterproof, moisture-proof and anti-corrosion to ensure that the inside of the electric control box and the terminals are clean and prevent electrical failures.
Third, cleaning work. Generally speaking, after the shutdown, the metering part should be cleaned in time. The scattered materials should be cleaned up in time, so as to better extend their service life. At the same time, the dust in the electric control box should be cleaned frequently to prevent electrical faults such as short circuit or poor contact.
If you also want to buy the machine in USA, contact us now. (Email: info@cankeytech.com )