Wafer Stick Roll Packing Machine Automatic Counting

The wafer stick packing machine can be connected to the finished product discharge conveyor belt of the front-end wafer roll production line to meet the packaging requirements of large-scale and mass production of wafer rolls. It is also possible to manually put wafer stick in to meet the production and packaging requirements of small batches and multiple batches of products of various specifications. We can carry out personalized design according to product characteristics to avoid squeezing and deformation of wafer rolls.

How Does Wafer Roll Work?

Wafer Roll Packing Machine Features:

☺ In the case of wafer stick congestion, stacking, and unsuccessful turning, it can be automatically rejected without stopping to ensure the connectivity and stability of production packaging.
☺ It adopts multi-level frequency conversion speed regulation and servo drive control, which can be adjusted according to the user's requirements for packaging speed and the shape of wafer roll, with strong adaptability.
☺ The wafer stick packing machine is equipped with a number of safety measures, including leakage protection, emergency stop function, fault shutdown protection, protective cover, warning lights, etc.
☺ The length of the bag is automatically and accurately tracked by the high-sensitivity photoelectric eye, and no manual adjustment is required after the bag length is set.
☺ The new double longitudinal sealing and heating structure can achieve excellent sealing at low temperature during high-speed packaging. When the machine is turned off, the heat sealing wheel is turned on automatically, which effectively prevents the packaging film from being scalded.
 

Wafer Roll Packing Machine Maintenance:

In order to ensure that the machine can serve the enterprise stably for a long time, the following issues should be paid attention to in daily work.
→ During the operation of the equipment, it is necessary to observe the operation status of the equipment frequently, and whether the parts are loose.
→ Pay attention to whether it is necessary to add grease to the lubricating part. It cannot be added until the machine is not sensitive, which will easily cause the wear of the machine.
→ While cleaning the packaging environment, it is also necessary to ensure that the equipment is clean, especially the parts that come into contact with raw materials.
→ If the wafer stick packing machine is not used for a long time, the residual raw materials must be cleaned up and all the outer casings must be cleaned up, and then the casing should be coated with rust inhibitor and covered with a cloth.