Cankey Packaging Machinery Total Solution Expert

Reliable Food Packaging HDPE Film Roll Manufacturers

HDPE Film Roll
PE Film Roll
HDPE film, short for high density polyethylene, is a kind of translucent film with high crystallinity and non-polar surface. PE film has excellent durability. 
As a PE film manufacturer, thanks to many years of experience, established quality system and well-proven formulas, we are able to offer different types of PE films in stable quality for a wide range of applications in the packaging industry. HDPE films are stronger, have higher thermal resistance while keeping the same strength at half of the thickness, thus reducing environmental burden considerably.
HDPE films for packaging allow easy and economical packing, protect products from contamination or damage, or from moisture and drying when stored and handled. The films are resistant to water and most chemicals. They are 100% recyclable. 
HDPE Film Factory

PE Film Roll Features:
◎It is resistant to acids and alkalis, resistant to organic solvents, and has excellent electrical insulation. At low temperatures, it still maintains a certain degree of toughness.
◎HDPE film has good heat resistance and cold resistance, good chemical stability, high rigidity and toughness, and good mechanical strength.
◎Dielectric properties, environmental stress crack resistance is better.
◎Wear resistance, electrical insulation, toughness and cold resistance are good, but slightly less than low density insulation.
◎Good chemical stability, insoluble in any organic solvent at room temperature, resistant to corrosion by acids, alkalis and various salts.
◎The PE film roll has low permeability to water vapor and air and low water absorption.
PE Film
HDPE film Use:
PE film is used in a wide range of applications, such as the food industry, the chemical industry, and the packaging industry.
◎PE films for packaging in the food industry: In the food industry, PE films are used as linings in the processing and production of frozen vegetables, frozen pastries, meat and fish. They are also suitable for hotels, restaurants and retail packaging semi-finished products.
◎PE film for shrink wrap: Shrink film is used to complete the packaging of different products in a hot air tunnel. When packaged, the film heats up and shrinks, wrapping tightly around the packaged product.
When the products requires advanced performance, you can choose coats, laminates and metallizes PE film, and as a PE film manufacturer, we can introduce you the solutions after know your requirement.
Technical Data
Density 0.941-0.965g /cm3
Moisture permeability 4.7-10 (g/24h*m2, 25μm,30℃, 90%RH)
Oxygen permeability 510-3875 (cm3/24h*m2, 25μm,23℃,0%RH)
Tensile strength 200-400(Kgf/cm)
Tear strength 15-300(gf/25cm)
Usual format 30-100μ
Softening temperature 115-125℃
Heat sealing temperature 135-165℃
Application The inner seal layer for the composite film

Send Inquiry

Your contact information will not be published. Required fields are marked*